|Place of Origin:||China|
|Certification:||CE RoHS TUV RED SAA|
|Model Number:||HD011S 1|
|Minimum Order Quantity:||100PCS|
|Packaging Details:||Bubble pack, paper flat, outer carton.|
|Delivery Time:||1-3 days for sample order, 1-2 weeks for bulk order|
|Payment Terms:||L/C, T/T, Western Union|
|Supply Ability:||100,000pcs Per Month|
|Operating Voltage:||-20℃-+60℃||Mounting Height:||Max.2.5-4m/8.2-13.12ft|
|Function:||On/off||Interfaces:||4-pole Pluggable Clamp Terminal(L,N,N,L’) For 24-14AWG Cable|
|Detection Angle:||30°-150°||Switching Capacity:||Max.100W|
|IP Rating:||IP 20||Lifetime:||50000 Hours|
Rod Antenna Microwave Motion Sensor with switch ON/OFF function to installed inside of the lighting fixture
|Input||Operating Voltage||220-240VAC 50/60Hz|
|Switching Capacity||Load Type||Max. 100W|
|Detection area||50% / 100%|
|Mounting Height||Max.4m(ceiling mounted)|
|Detection Range||Max.12m(ceiling mounted)|
|Operating Frequency||5.8 GHz ±75 MHz|
|Certificate||Certificate Requirement||CE / TUV / RoHs / RED|
|IP Rating||IP20 (Built-in)|
|Installation Size||76.9 X 39.9 X 27.7mm|
|Packaging Requirement||Bubble bag +Outer Carton(K=A)|
ON/OFF Daylight sensor Detection area
Hold time Warranty of 5 years
4-pole press-in terminal (L, N,N,L′). N,L for connecting with main supply and N, L’ for connecting with LED Driver which make it very easy to be assembled
Rod antenna design with size of 76.9 X 39.9 X 27.7mm which could be easily installed inside of ceiling light and panel light with open a super small hole on the light board.
Max. detection range will be 12m for ceiling mounted.
Dip Switch Settings:
Detection area Hold time Daylight threshold
Detection area means Hold-time means the Daylight sensor priors
detection coverage. It time period the light to motion sensor. Set
can be adjusted by will be ON,after the threshold for specific
combining DIP last detection. needs. If disable, only
switches for specific motion sensor works.
With sufficient daylight, With insufficient daylight,when
even when motion motion detected,light ON.
detected, light remains OFF.
After last detection,the light will be
dimmed down to the stand-by
dimming level after holdtime.
The motion sensor can penetrate most of objects such as glass, wood, plastic but metal. It won’t be affected by ambient temperature, dust and widely applied in office, corridor, fire exit, warehouse, basement and other indoor lighting places for saving energy.