|Operating Voltage:||120VAC 50Hz/60Hz||Switching Capacity:||Max.100W|
|Microwave Frequency:||5.8GHz±75MHz||Stand-by Power:||<0.5mW|
|Mounting Height:||2.5-5m/8.2-16.4ft (ceiling Mounted)||Detection Range:||Radius, 3-6m/9.84-19.68ft (ceiling Mounted)|
|IP Rating:||IP20||Warranty:||5 Years|
Compact Light On Off Sensor Radius 9.84 - 19.68ft Detection Range Ceiling Mounted
ON/OFF Function Microwave Motion Sensor HD412S with Super Compact Design which could be Applied to Ceiling Light, Downlight or Tracking Light with Built-in Installation Way
1. 120VAC 50Hz/60Hz with switch capacity of Max. 100W.
2. TUV RED SAA CE certificated microwave motion sensor.
3. Super compact design for built-in installation of ceiling light or downlight.
4. Daylight function to smartly detect natural light and artificial light.
5. DIP switch setting for hold time, daylight threshold and detection area.
6. ON/OFF Function Switch Sensor.
7. IP20 Built-in installation.
|Input||Operating Voltage||120VAC 50Hz/60Hz|
|Output||Load Type||Max. 100W (Control gear);|
|Detection area||50% / 100%|
|Mounting Height||Max.5m(ceiling mounted); Max.3m(wall mounted)|
|Detection Range||Max.12m(ceiling mounted); Max.10m(wall mounted)|
|Operating Frequency||5.8 GHz ±75 MHz|
|Certificate||Certificate Requirement||CE / TUV / RED / SAA|
|Others||Wiring Method||4-pole terminal (Input grey L. N. Output grey N. L’)|
|IP Rating||IP20 (Built-in)|
|Packaging Requirement||Bubble bag +Outer Carton(K=A)|
ON/OFF Daylight Sensor Detection Area Warranty 5 years Hold time
With a super compact design, it's a very small size for ceiling light, downlight and tracking light.
With a protruding module, it will need to remove a very few light bead on the board to expose the module out of the metal board
Simple wiring way with four terminals:
"N,L" connecting with power supply and "N,L'" connecting with LED driver.
Max. detection range will be 12m for ceiling mounted; Max. Detection range will be 10m for wall mounted.
Typically installation height 2.5-6M. This figure indicates the maximum distance at the highest mounting height with 100% sensitivity.
DIP Switch Settings
1 to set detection area.
|2&3 to set Hold time
The period of light keeping 100% brightness after moving objects leave the detection area.
|4 to set Daylight threshold
Definition of the ambient brightness; only when the ambient brightness is lower than the preset specific lux amount, the sensor will work; when it's preset as "disable",the sensor works everytime it detects motion regardless the ambient brightness.
1. Automatically ON/OFF function
Light on when detect movement and off after people leave at night. Applications: Corridor, Staircase.
2. No daylight function
The daylight threshold is set to "Disable".
Light on when detect movement, After people leave, Light off after hold on time. Applications: Dim places such as Basement Parking, Underpass.