Zhaga Base Cover Interchange Photocell And Daylight Harvesting RoHS CE Certificate
HD06VCRH 7A .pdf
1. Photocell Function.
2. Daylight Harvesting.
3. Ambient Brightness Learning.
4. 12VDC input, 0-10V dimmable.
5. Remote control
6. 5 years warranty.
|Rated operational voltage
||10.5-15VDC(The DC supply current cannot be less than 30mA)
||<20mA (Power Consumption)
||install on the side,not in the light source
|Manner of working
||Optically controlled dimmer
|Photocell:2Lux/10Lux(Light will be off when ambient brightness is 10 times of preset lux level)
|Ambient Brightness Learning
||Remote control to learn ambient brightness and daylight harvesting
||Please refer to the user manual of HD05R for daylight threshold
Photocell Daylight Harvesting Daylight Sensor
Remote Control 5 Years Warranty
The whole product is made uo of seven parts,as shown in the fixture.
When ambient brightness is lower than the preset lux level options(30Lux/50Lux/80Lux/120Lux/200Lux/250Lux/300Lux/350Lux/400Lux),LED light will be darker when ambient is getting brighter,and brighter when darker,when ambient brightness is brighter than preset lux level.,light off.
With Daylight priority function, HD02VRH 1 is able to differentiate artificial light brightness
from natural light after installed inside the fixture, and automatically turn off light when
ambient brightness exceeds preset lux level.
Application of Daylight harvesting:
When ambient brightness is lower than preset lux level,sensor will turn on light automatically and keep dimming according to the change of the ambient brightness;when outside is getting darker,the side will be brighter,and brighter darker.
Light off when ambient brightness becomes higher than the preset lux level.
The sensor performs photocell function when preset lux level is only 2Lux/10Lux.
1.Light will automatically ON when ambient brightness is lower than perset level. (Scene 1)
2.Light will automatically OFF when ambient brightness is 10 times higher than preset level. (Scene 2)
Ambient brightness learning:
Instead of giving a specific lux level, this function enables current ambient brightness to be learnt and
set as a standard lux level; When ambient brightness is getting darker, the artificial light will be
brighter; and brighter darker; When ambient brightness exceeds the standard level, light will turn off.
1. Light ON, use HD05R remote;
2. Press “ Scene ” button；
3. Then press MW/PIR button twice till you see the MW icon and PIR icon on the screen display start
flashing, then the light will keep OFF for about 3S and turn ON again, that means learning completed.
Application of photocell learning:
When ambient When ambient level gets brighter,the artficial
brightness is lower than light become darker.
the learnt standard
level, light will keep
When ambient level is
brighter than the learnt
standard level, light will
HD05R Remote Control Keys Function Introduction
1,Daylight Harvesting Setting
① Step 1- Press "ON/OFF" to turn on the light.
② Step 2- Press “ Scene ” button；
③ Step 3 - Press related keys to set daylight threshold, with pressing "+"/"-" within 5s when the icon start to flash.
2. Power Output Setting
① The output could be set under two mode-Sensor Mode and Always ON Mode.
② Under always ON mode, press"+"/"-" to adjust the output from 10%~100%.
③ Under the sensor mode, press "Scene"-"Power", then press"+"/"-" to adjust the output from 60%~100%.
Note: Under the sensor mode, the data shown in the display could be set from 10%-100%, but the brightness would be
60% at lowest and won't dim any more.