Products
Home

Microwave Motion Sensor

AC 2-IN-1

40W Isolated LED Driver sensor

40W Isolated LED Driver sensor

40W Power Isolated LED Driver with 0.4A Current For Batten Light

HT40V-I is Isolated 40W LED Driver & Microwave Motion Sensor Combined 2-in-1 products with 30-54V Output Voltage, Daylight Priority and Detection Range & Height of 6m(H) x 14m(D), Dimming Function with Constant Output LED Current Suitable for Batten Light & Tri-proof Light

  • Brand:

    HAISEN
  • Item NO.:

    HT40V-I
  • Order(MOQ):

    100PCS
  • Payment:

    L/C, T/T, Western Union
  • Product Origin:

    China
  • Product Detail

40W Power Isolated LED Driver with 0.4A Current For Batten Light

HT40V-I is Isolated 40W LED Driver & Microwave Motion Sensor Combined 2-in-1 products with 30-54V Output Voltage, Daylight Priority and Detection Range & Height of 6m(H) x 14m(D), Dimming Function with Constant Output LED Current Suitable for Batten Light & Tri-proof Light


Features:

1. Isolated Solution LED Driver & Microwave Sensor Combined

2. Daylight Priority

3. Tri-level control by 1-10V output

4. 3 years warranty, IP20

5. Slim design specially for batten light and tri-proof light

6. Constant Current with options of 0.7A (30-54V)/0.8A (30-48V)/0.90A (30-42V)/0.95A/1.0A (30-36V)

7. Dimming Function with 10%/30% Stand-by Brightness

8. Efficiency of 83%

9. Detection Range x Height of 14M x 6M

10. Output Power 19W max. with Voltage of 30-54V

11. Abnormal protection SCP: Auto recovery, OVP, OCP, OTP

12. EMC standardEN55015

13. Rod Antenna Design to be easily installed.

14. Remote Control setting / DIP Switch Setting


Product Description

Input voltage 120-277VAC 50/60Hz
Input current 0.4A Max
Input power 45W Max
Detection area 50%/100%
Hold time 5s/60s/ 5min/10min
Daylight threshold 2Lux /10Lux /50Lux/Disable
Stand-by period 0s/10s/10min /+∞
Stand-by dimming level 10%/30%
Microwave frequency 5.8GHz±75MHz
Microwave power <0.3mW
Detection angle 30°-150°
Mounting height Max.6m
Detection range Max.ø14m
Output LED current 0.7A (30-54V)/0.8A (30-48V)/0.90A (30-42V)/0.95A/1.0A (30-36V)
Output LED voltage 30-54V
Output LED power 40W Max.
Empty load voltage ≤63V
Power factor >0.9
Efficiency 83% (Max.)
Operating temperature Ta: -20°C+50°C Tc: 80°C
Abnormal protection SCP:Auto recovery,OVP,OCP,OTP
EMC standard EN55015
Safety standard EN61347-1 EN61347-2-13 EN60598-1
IP rating IP20
Life time 30,000 hours
Warranty 3 years


Detection Range

This figure indicates the maximum distance at the highest mounting height with 100% sensitivity.

Typical installation height 2.5-4m.


Mechanical structure

With twelve DIP switch poles to set Output Current Setting, Mode Selection, Stand-by Dimming Level, Standy-by Period, Detection Area, Hold Time and Daylight Threshold.

With an IR Receiver to support remote control setting.

With two installation hole, easily fixed to the lighting fixture for end user.


Wiring diagram

Two poles to connect with power supply (120-277VAC)

Two poles to connect with LED Light


Dimensions (mm)


DIP Switch Setting


Daylight Priority

With Daylight priority function, HT19V-I is able to differentiate artificial light brightness
from natural light after installed inside the fixture, and automatically turn off light when
ambient brightness exceeds preset lux level.

Precondition of Daylight priority:
1. Standby period is +∞;
2. Standby dimming level is on 10% or 30%;
3. Daylight threshold is on 2Lux, 10Lux or 50Lux.


Application Demo

1. Automatically ON/OFF function:

Light on when detect movement and off after people leave at night. Applications: Corridor, Staircase.
The daylight threshold is set to "2lux,10lux,50lux"

With sufficient daylight, With insufficient daylight, After the last detection and
even when motion detected, when motion detected, light ON. the present hold time
light remains OFF. elapsed, light OFF.

2. No daylight function
The daylight threshold is set to "Disable".
Light on when detect movement, After people leave, Light off after stand-by period.
Applications: Dim places such as Basement Parking, Underpass.

When motion is detected, After people leave the detection After the last detection and
the sensor will switch on the area, light remains 100% the present hold time
light to 100% brighteness. brightness within hold time. elapsed, light OFF.

3. Function Demo - Dimmable control/Corridor function

With sufficient daylight, With insufficient After last detection, After the stand-by
even when motion daylight, when motion light will be dimmed period, light OFF.
detected, light remains detected, light ON. down to the stand-by
OFF. dimming level (10% or

30%) after holdtime.


Installation Method:


User Notes:

1.Microwave can penetrate walls or glass thinner than 20cm and attenuate if thicker than 20cm.
2. Detection area will be affected by speed of motion, mounting height and movement volume.
3. Conduct test on sunny days without the lampshade which will affect the tested lux value.


Application Case:


Leave A Message

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

Related Products
dimmable occupancy sensor
Motion Sensor Dimmer Switch 5.8G Frequency Sensor Output LED Power 9-18W

Motion Sensor Dimmer Switch 5.8G Frequency Sensor Output LED Power 9-18W

dimmable occupancy sensor
Linear Detachable 0.3mW Microwave Dimmable Motion Sensor

Linear Detachable Design Remote Control Setting 3 Years Warranty Dimmable Sensor

dimmable occupancy sensor
Round Plane Antenna 34W Ceiling Mount Motion Sensor

Round Design Plane Antenna For Ceiling Light Dusk Dimmable Motion Sensor

led emergency driver
Slim Design Microwave LED Driver Sensor Combined 12 - 25W 0.23A Current Linear Light

Slim Design Microwave LED Driver Sensor Combined 12 - 25W 0.23A Current Linear Light

led driver sensor
19W LED Microwave Switch Occupancy Sensor

HT19V 2 is a LED Driver&Microwave Sensor 2-in-1 Products with 30-54V Output Voltage Detection Range & Height of 6m(H) x 14m(D), Dimming Function Microwave Motion Detector with 12-19W Output Power Suitable for Ceiling Light

driver sensor
Empty Load 63V LED Driver Sensor

HT19V-I is a Flicker-Free 220-240VAC 18W LED Driver&Microwave Sensor 2-in-1 Isolated Solution with 24-52V Output Voltage and 6m(H) x 14m(D) Mounting Height and Detection Range

microwave motion sensor
Constant Currant Output Daylight Detection Microwave Movement Sensor

Constant Currant Output Daylight Detection Microwave Movement Sensor

dimmable occupancy sensor
Sensitive 30°-150° 0.08A 16W Motion Detector Sensor

Sensitive 30°-150° 0.08A 16W Motion Detector Sensor

© Copyright: 2021 Shenzhen Haisen Technology Co.Ltd. All Rights Reserved.

IPv6 network supported

IPv6 network supported

top

Leave A Message

Leave A Message

    If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

  • #
  • #
  • #
  • Refresh the image