Products
Home

UV Light Sensor

5.8GHz On/Off Function UV Light Sensor For Sterilizing Lamp

5.8GHz On/Off Function UV Light Sensor For Sterilizing Lamp

The indicator light will flash when the sensor receives the signal during setting, indicating that the setting is successful.

  • Brand:

    HAISEN
  • Item NO.:

    HD401S CR-UV
  • Order(MOQ):

    100PCS
  • Payment:

    L/C, T/T, Western Union
  • Product Origin:

    China
  • Product Detail

Detached Design Remote Control Apply for sterilizing lamp on/off function sensor

HD401S CR-UV Features:

1. When a person walks into the detection area,the lights will automatically go out.

2.The detection area,delay-off settings and delay-on settings are adjustable.

3. Support remote control to set parameters by HD01R.

4. Separate design for easy installation into lamps

5. Saving energy,protecting environment intelligent sterilization.

6. IP 20 with 5 years warranty.

HD401S CR-UV Description:

Operating voltage 120VAC,50Hz/60Hz
Switch capacity Impedance load 400w,capacitive load 200w
Stand-by power ≤1W(230VAC)
Power on delay turn on time 15s
Detection area 50%/100%
Hold time 15min/30min/60min/120min
Method of the connection wire Amphenol connector(L,N,N,L')
Output control ON/OFF
Method of setting up By HD01R remote control
Microwave Frequency 5.8GHz±75MHz
Microwave Power <0.3mW
Mounting Height 0.5m-1.2m(on the desktop),1.5-3m(side mounting)
Detection Range Radius3-6m/9.84-19.68ft(Ceiling Mounted)
Motion Detection 0.5m/s
Detection angle Less than 150° for wall-mounted installation,the ceiling installation is 360°
Temperature -25°C~+60°C
IP Grade IP 20
Certificate RoHS CE
Warranty 3 years
Product net weight 0.06kg
manner of packing Products with air bags, cardboard compartments packing, 18pcs/layer, 6 layers/box
carton size 40*30*24cm
Gross weight 7.5kg
The detection distance and delay time setting reference HD01R remote control


ON/OFF Control Detection Area Remote Control

Warranty 5 years Hold Time

HD401S CR-UV Mechanical Structure


HD401S CR-UV Dimensions (mm)

Application Demo

1.When the sterilization lamp is powered on,the indicator light will be on long.The sterilization lamp will be saved and turned off.The remote control (ON/OFF) is needed to turn on the light.

2.After pressing the remote control button(ON/OFF),the indicator light flashes for 15s.After 15s,the sterilization light starts to work.After the end of working hours,the sterilization light turns OFF.

3.If the sterilization lamp is in working state and someone is detected walking,the sterilization lamp will automatically turn OFF.After people leve the induction area,the sterilizing lamp will not automatically turn ON,so you need to press ON/OFF button remote control to turn ON the lamp again.

When the sterilizing light is After 15s,the sterilizing lamp If the sterilizing lamp is working

ON,turn ON he light by will start to work.The time can state and someone is detected

remote control(press ON/OFF) be set to(15min/30min/60min to be walking,the light will

and the indicator flashes for /120min).After the working automatically turn off,and the

15s,When the sterilizing light time,the lamp will automatically rear light will not automatically

is ON,people should leave turn off. turn on when the person leaves

the scene. the sensing area.

Remark:

There are two ways turn on the sterilization lamp

1.Press the remote control(ON/OFF)key,the indicator light flashes for 15s,and the sterilizing light turns ON.

2.Press AC switch 3-8 times continuously,and turn on the sterilizing lamp after the indicator flashes for 15s.

HD01R remote control instruction for use:

Remote Keying Function Of The Button Function Introduction
ON/OFF 1. Sterilization lamp long on/long off function;
2. Turn off the induction mode and press the reset key to exit.
Reset Restore factory default setting: detection range 100%, turn on lamp delay 15S, sterilization lamp delay 1H turn off lamp
Detection area Refers to the microwave detection range setting
Hold time That is, the working time of the disinfection lamp is long
Note: In the absence of obstacles, the linear remote control distance is about 4-6m;
The blank keys in the remote control are non-functional keys.

Remote control Settings:
1. Press the reset button in front of the sensor to be set;
2. Set the detection distance and working time of the sensor
3. Remote control setting is completed, and the set value sensor will be saved automatically.


Note: The indicator light will flash when the sensor receives the signal during setting, indicating that the setting is successful.


Leave A Message

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

Related Products
Dial Code UV Microwave Sensor
220-240VAC Ceiling Mounted UV Light Sensor ON/OFF Fuction

220-240VAC Ceiling Mounted ON/OFF Fuction Sterilization Lamp Application

Dial Code UV Microwave Sensor
Microwave ON/OFF UV Light Sensor

Microwave ON/OFF UV Light Sensor is used in the disinfection lamp.The rader module detects that the disinfection lamp does not turn on when an object is moving,and the disinfection lamp turns on when no object is moving.

Dial Code UV Microwave Sensor
Dual Control UV Light Sterilization Lamp Microwave Sensor

Dual Control UV Light Sterilization Lamp Microwave Sensor Suitable for indoor installation to avoid false triggering due to external factors such as rain, wind or tree swing.

Dial Code UV Microwave Sensor
Compact Size 5.8GHz Microwave UV Light Sensor

The light will keep OFF with After the indicator flashes for (15s/20s/30s/60s) after 5s,the UVC lamp start to work.people leave. After then, the After the work time, Light OFFindicater will flash for 5s. until next movement detected. by recycling.

PIR indoor lighting sensor
PIR indoor lighting sensor

PIR indoor lighting sensor

dimmable occupancy sensor
Indoor Ceiling Mounted Dimmable Motion Sensor 50 60Hz Compact Design

Indoor Ceiling Mounted Dimmable Motion Sensor 50 60Hz Compact Design

microwave motion sensor
50 60Hz Microwave Movement Sensor On Off Dimming Microwave Presence Sensor

50 60Hz Microwave Movement Sensor On Off Dimming Microwave Presence Sensor

microwave motion detector
Rod Antenna Microwave Motion Sensor with Dip Switch and On OFF Function Liner Compact Size

Microwave can penetrate walls or glass thinner than 20cm and attenuate if thicker than 20cm.

© Copyright: 2021 Shenzhen Haisen Technology Co.Ltd. All Rights Reserved.

IPv6 network supported

IPv6 network supported

top

Leave A Message

Leave A Message

    If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

  • #
  • #
  • #
  • Refresh the image