Blog

How To Use Our HD05R Remote Control

  • July 20. 2021

A lot of our sensors working with remote control.

Our newest generation has specially prepared a LCD screen display to read the setting. 

Model #HD05R, in White color, with/without HAISEN logo. 


Please try to follow below steps to use it:

1. ON/OFF button to turn on the light

2. Try +/- buttons in the center to dim up or down the light

(Please note sensor doesn't work here, it's still normal ON/OFF mode)

3. Press SCENE button, enter into programming, you will see all information on the LCD.

4. Press DETECTION AREA button, you will see this icon flicking, then use +/- buttons to change numbers among 100% 75% 50% and 25%

5. Press HOLDTIME button, same steps, you can choose a wanted option. 

6. Press DAYLIGHT THRESHOLD, STANDBY PERIOD, STANDBY DIMMING LEVEL and choose wanted options for all of them. 

You may notice each press will make light blinking for a short 1S, that's designed to tell the program has been executed.

So now you have make yourself a special program and you can tell it from the LCD screen.



What if you want to make the same program to 100pcs or more sensors?

Please follow below to get your program saved:

At the 1st sensor: 

1. ON/OFF button to turn on light

2. SCENE button to start programming

3. START button

4. Choose options of DETECTION AREA, HOLDTIME, DAYLIGHT THRESHOLD, STANDBY DIMMING LEVEL AND STANDBY PERIOD. 

5. MEMORY button 

6. APPLY button

At the rest sensors:

1. ON/OFF button to turn on light

2. SCENE button to start programming

3. APPLY button to deliver the saved program

Then just leave it. 


Please let us know if you have any problems in working it. 

Thank you. 

Categories

Tags

© Copyright: 2021 Shenzhen Haisen Technology Co.Ltd. All Rights Reserved.

IPv6 network supported

IPv6 network supported

top

Leave A Message

Leave A Message

    If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

  • #
  • #
  • #
  • Refresh the image