Products
Home

Microwave Motion Sensor

IC Series

Daylight Priority Bare Board DC Motion Sensor with 10m Installation Height

Daylight Priority Bare Board DC Motion Sensor with 10m Installation Height

Daylight Priority Bare Board DC Motion Sensor with 10m Installation Height

  • Brand:

    HAISEN
  • Item NO.:

    HD06VCRH 1C
  • Order(MOQ):

    100PCS
  • Payment:

    L/C, T/T, Western Union
  • Product Origin:

    China
  • Product Detail

Daylight Priority Function Bare Board 10m Installation Height


Features of Sensor:

1. Automatic On/off control with a Daylight sensor.

2. Optional detection range, hold time, daylight threshold, Stand-by period and

Stand-by dimming level.

3. Remote control setting.

4. 5 years warranty.

Product Description of  Sensor:

Operating voltage 10-15VDC
Operating current ≤30mA (Current consumption)
Output DIM 1-10V
Connection mode bonding pad,+12v,GND,DIM+
Stand-by power ≤0.5W
The dimming mode Add/subtract dimming (power mode 10%-100%, induction mode 60%-100%)
Microwave frequency 5.8GHz±75MHz
Microwave Power <0.3mW
Mounting Height 10m/32.81ft (ceiling mounted)
Detection Range Max,ø14m/45.92ft (ceiling mounted)
Detection angle 30°-150°
Method of setting up Remote control
Detection area 25%/50%/75%/100%
Hold time 5s/30s/1min/3min/5min/10min/20min/30min
Daylight threshold 2Lux/10Lux/30Lux/50Lux/80Lux/120Lux/Disable
Stand-by period 0s/10s/30s/1min/5min/10min/30min/+∞
Stand-by dimming level 10%/20%/30%/50%
Certificate RoHS CE
Motion detection 0.5~1.0m/s
Operating Temperature -20°C~+60°C
IP grade IP20
Warranty 5 years

Factory Default Setting: Detection area 100%/ Hold time 5s/ Daylight threshold Disable/Stand-by

period 0s/Stand-by dimming level 10%.

ON/OFF Control           Detection Area Hold Time           Daylight Threshold      Warranty of 5 years

Stand-by Period    Stand-by Dimming Level    Remote Control


Mechanical structure of Dimmable Sensor:

The output signal of this product is PWM and DIM 1-10V,which can be applied either way.





Dimensional drawing (Unit: mm) of Dimmable Sensor:



Wiring diagram of Dimmable Sensor

Detection coverage of Dimmable Sensor:

Typical installation height 10m

This figure indicates the maximum distance at the highest mounting height with 100% sensitivity.



Daylight Priority of Dimmable Sensor:

Dusk/Dawn sensor:
Dual-PD technology brings a fully automatic dusk/dawn sensor which can tell the difference between natural light and LED light, to ensure the light will be off when needed.
With Daylight priority function, HD06VCRH is able to differentiate artificial light brightness from natural light after installed inside the fixture,and automatically turn off light when ambient brightness exceeds preset lux level.
Precondition of Daylight priority:
1. Standby period is +∞;
2. Standby dimming level is on 10%, 20% or 30%;
3. Daylight threshold is on 30Lux, 50Lux, 80Lux or 120Lux.

Application____Daylight Priority:

Light automatically on With insufficient                   Light dims to standby Light off when
when ambient ambient brightness,              level if no motion ambient lux level
brightness is lower light dims to 100%                detected after                     is higher than
than preset lux level. when motion detected . holdtime. preset lux amount.
Application:
1. Automatically ON/OFF function:
Light on when detect movement and off after people leave at night. Applications: Corridor, Staircase.


With sufficient daylight, With insufficient daylight,              After the last detection and
even when motion detected, when motion detected, light          the present hold time
light remains OFF.                           ON. elapsed, light OFF.
2. No daylight function
The daylight threshold is set to "Disable".
Light on when detect movement, After people leave, Light off after stand-by period.
Applications: Dim places such as Basement Parking, Underpass.
When motion is detected,               After people leave the                    After the last detection and
the sensor will switch on the          detection area, light remains the present hold time
light to 100% brighteness.              100% brightness within elapsed, light OFF.
hold time.
3. Function Demo - Dimmable control/Corridor function
With insufficient With sufficient daylight,     After the stand-by           After last detection, the
daylight, when motion even when motion             period, light OFF.             light will be dimmed
detected, light ON. detected, light remains                                             down to the stand-by
OFF. dimming level
(10%,20%,30% or 50%)
after holdtime.
Attention:
1. Please read the instructions carefully before using this product and keep it well for all users to
read at any time.
2. The sensor should be installed by qualified electrician and ensure power is off before the
installation.
3. We reserve the right to modify any incorrect text, image and necessary technical parameters.
4. Any unauthorized modification is forbidden, otherwise all guarantees will be immediately invalid.
Installation precautions:
1. Microwave sensor can be installed in any lamp except the one with full metal shell.
2. The detected surface cannot be shielded by metal objects.
3. Make sure the microwave module is completely exposed outside.
4. The detection surface of the sensor module shall be installed facing the detection area.
5. Should be kept away from the driver to avoid interference generation and lamp flashing.
6. Wiring must be strictly in accordance with the wiring diagram to avoid short circuit.
Application Environment:
1. Suitable for indoor installation to avoid false triggering due to external factors such as rain, wind or tree swing.
2. Shall not be installed in the place with all four metal shelters and small space (such as galvanized-iron roof ).
3. Shall note be mounted installation, so as to avoid false trigger caused by the lamp itself shaking.
4. Shall not be installed next to large operating machines such as ventilator/ceiling fan to avoid false triggering caused by machine vibration.
User Notes:
1.Microwave can penetrate walls or glass thinner than 20cm and attenuate if thicker than 20cm.
2. The driver voltage shall be stable and float within 10%.
3. Detection area will be affected by speed of motion, mounting height and movement volume.
4. Conduct test on sunny days without the lampshade which will affect the tested lux value.


Leave A Message

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

Related Products
microwave motion detector
5V PWM Output 360° Detection Angle ON/OFF Control microwave motion detector

5V PWM Output 360° Detection Angle ON/OFF Control microwave motion detector

dimmable occupancy sensor
12VDC Input ON/OFF Control 5V PWM Dimming Output 100% Detection Motion Sensor

12VDC Input ON/OFF Control 5V PWM Dimming Output 100% Detection Motion Sensor

dc motion detector
ON/OFF Control DC Motion Detection Sensor Bare Board 22*20*6 MM Size Detection 3-6m

ON/OFF Control DC Motion Detection Sensor Bare Board 22*20*6 MM Size Detection 3-6m

microwave motion detector
12VDC 5V PWM Customized Detector On Off Switch Sensor 20*24*6.7mm For LED Bulb

12VDC 5V PWM Customized Detector On Off Switch Sensor 20*24*6.7mm For LED Bulb

dc motion detector
Dimming Daylight Harvesting Less Than 30mA DC Motion Sensor

Dimming Daylight Harvesting Less Than 30mA DC Motion Sensor

microwave motion sensor
UFO High Bay Motion Sensor with Ceiling Mounted For Lighting Control

UFO High Bay Motion Sensor with Ceiling Mounted For Lighting Control

Rod Antenna motion sensor
Rod Antenna Design Microwave Motion Sensor Max 100W Switching Capacity

HD411SR- ON/OFF Microwave Motion Sensor with IP20 and Rod Antenna Design for Built-in Installation, Max. 14M Range x 4M Height 120-277VAC Operating Voltage For Panel Light/Ceiling Light/Tri-proof Light.

dc motion detector
5.8GHz 12V DC Microwave Sensor with Rod Antenna and 9 DIP Switch

HD016VCRH 2 is a super compact and slim design 12 volt DC microwave motion sensor with a rod antenna to be easily installed inside of LED light. 1-10V dimming motion detector with DIP switch to set all parameters and also support remote control settings.

© Copyright: 2021 Shenzhen Haisen Technology Co.Ltd. All Rights Reserved.

IPv6 network supported

IPv6 network supported

top

Leave A Message

Leave A Message

    If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

  • #
  • #
  • #
  • Refresh the image