Products
Home

UV Light Sensor

Microwave ON/OFF UV Light Sensor

Microwave ON/OFF UV Light Sensor

Microwave ON/OFF UV Light Sensor is used in the disinfection lamp.The rader module detects that the disinfection lamp does not turn on when an object is moving,and the disinfection lamp turns on when no object is moving.

  • Brand:

    HAISEN
  • Item NO.:

    HD08S 2
  • Order(MOQ):

    100PCS
  • Payment:

    L/C, T/T, Western Union
  • Product Origin:

    China
  • Product Detail

Microwave ON/OFF UV Light Sensor 

Features of ON/OFF Switch Sensor:

1. Smart sensor,light OFF when people approach and light ON after leaving.

2. Optional detection range, ON/OFF hold time.

3. Application: living room, cinema, office etc.

4. 5 years warranty.

Product Description of ON/OFF Switch Sensor:

Factory default setting: 100% detection area, 30min OFF hold time and 10s ON hold time.

Operating voltage 220-240VAC 50/60Hz
Connection mode Amphenol connector(L,N,N,L')
Control load capacity Impedance load(300W), capacitive load(100W)
Stand-by power ≤0.5W
Output control mode ON/OFF
Microwave frequency 5.8GHz±75MHz
Microwave power <0.3mW
Mounting height 2.5-5m/8.2-16.4ft
Detection range Radius, 3-5m/9.84-16.4ft
Detection angle 30°-150°
Method of setting up Dial code
Hold time 10s
Detection area 50%/100%
Tum-off delay 30min/1H/2H/4H
Tum-on delay 10s/5min
Certificate CE RoHS
Operating temperature -25°C~+60°C
IP grade IP20

ON/OFF Control Detection Area Hold Time Warranty of 5 years

Detection Range of ON/OFF Switch Sensor

Mounting Height: 2-5M

The figure shows the detection range graph under the 100% sensitivity and 2-5M mounting height.

Mechanical structure of ON/OFF Switch Sensor

Wiring diagram of ON/OFF Switch Sensor

Dimensions of ON/OFF Switch Sensor(mm)

Settings:

By selecting the combination of the DIP switches,sensor will be precisely set for different applications.

Detection area:

It's detection range,or sensitivity. When people walk into detection area, sensor will be triggered to turn off the light automatically.

Light OFF Hold Time Setting:
The hold time that lamp keep ON until turn OFF.

Light ON Hold Time Setting:
When people leave the detection area, the hold time that lamp keep OFF until turn ON.
Application Demo of ON/OFF Switch Sensor
Light turn off when people Light keep off with 10s/5min After turned on, the UVC approach the detection after people leave and then lamp starts to work, the
area. turn on automatically. hold time can be set to 30min /1H /2H/3H/4H,and then turn off.
Remark of ON/OFF Switch Sensor:
1.This product is used in the disinfection lamp.The rader module detects that the disinfection lamp does not turn on when an object is moving,and the disinfection lamp turns on when no object is moving.(It is not recommended to use this product in the environment where there are people but no movement,to prevent the rader from not receiving the signal and the disinfection lamp turns on when people are present.)
2.After 10s of power on,if there is no object movement induction,turn on the light for 30min/1h/2h/4h,turn off the light and wait for the next induction;if there is motion sensing of the object,the light will be turned off when it is off,and the light will be turned on for 10s/5min after no one is induced.
3.The dialing code of 2 and 3 is delay turning off the light.When the light is on for a delay of 30min/1h/2h/4h(no induction midway),turn off the light and wait for the next induction.
4.The dialing code of 4 is delayed to turn on the light,and the delay is 10s/5min after no induction.

Leave A Message

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

Related Products
Dial Code UV Microwave Sensor
220-240VAC Ceiling Mounted UV Light Sensor ON/OFF Fuction

220-240VAC Ceiling Mounted ON/OFF Fuction Sterilization Lamp Application

Dial Code UV Microwave Sensor
5.8GHz On/Off Function UV Light Sensor For Sterilizing Lamp

The indicator light will flash when the sensor receives the signal during setting, indicating that the setting is successful.

Dial Code UV Microwave Sensor
Dual Control UV Light Sterilization Lamp Microwave Sensor

Dual Control UV Light Sterilization Lamp Microwave Sensor Suitable for indoor installation to avoid false triggering due to external factors such as rain, wind or tree swing.

Dial Code UV Microwave Sensor
Compact Size 5.8GHz Microwave UV Light Sensor

The light will keep OFF with After the indicator flashes for (15s/20s/30s/60s) after 5s,the UVC lamp start to work.people leave. After then, the After the work time, Light OFFindicater will flash for 5s. until next movement detected. by recycling.

wireless motion sensor
IP65 Bluetooth Motion Sensor

Wireless bluetooth networking sensor to smartly control groups of LED light without quantity limitation.

Dial Code UV Microwave Sensor
Dual Control UV Light Sterilization Lamp Microwave Sensor

Dual Control UV Light Sterilization Lamp Microwave Sensor Suitable for indoor installation to avoid false triggering due to external factors such as rain, wind or tree swing.

PIR SENSOR
PIR SENSOR

PIR Panel SENSOR

dc motion detector
PWM 0-10V Dimming DC Motion Sensor DIP Switch For Ceiling Tri-proof Light

PWM 0-10V Dimming DC Motion Sensor DIP Switch For Ceiling Tri-proof Light

© Copyright: 2021 Shenzhen Haisen Technology Co.Ltd. All Rights Reserved.

IPv6 network supported

IPv6 network supported

top

Leave A Message

Leave A Message

    If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

  • #
  • #
  • #
  • Refresh the image