|Operating Voltage:||120-277VAC 50Hz/60Hz||Switching Capacity:||Max.3.0A,120Vac; Max.2.0A,277Vac|
|Microwave Frequency:||5.8GHz±75MHz||Stand-by Power:||<1W|
|Mounting Height:||12m/39.36ft (ceiling Mounted)||Detection Range:||Max.14M/45.92ft|
|IP Rating:||IP20||Warranty:||5 Years|
120 - 277V 12M Height Motion Detection Sensor ON / OFF IP20 Switch Sensor
ON/OFF Motion Detector HD401S with Voltage of 120-277VAC and Small Size for Built-in Installation of Ceiling Light with Max. Mounting Height of 12M in Gym, Airport and the Likes
1. ON/OFF switch sensor with Voltage of 120-277VAC.
2. UL FCC Certificate.
3. Max. mounting height 12M.
4. DIP switch setting hold time, daylight threshold and detection area.
5. IP20 Built-in installation.
|Input||Operating Voltage||120-277VAC 50Hz/60Hz|
|Output||Load Type||Max.3.0A,120Vac; Max.2.0A,277Vac|
|Detection area||10% / 50% / 75% / 100%|
|Daylight Threshold||2Lux / 10Lux / 50Lux/Disable|
|Mounting Height||Max.12m(ceiling mounted); Max.3m(wall mounted)|
|Detection Range||Max.14m(ceiling mounted); Max.10m(wall mounted)|
|Operating Frequency||5.8 GHz ±75 MHz|
|Certificate||Certificate Requirement||UL FCC|
|Others||Wiring Method||4-pole terminal (Input grey L. N. Output grey N. L’)|
|IP Rating||IP20 (Built-in)|
|Packaging Requirement||Bubble bag +Outer Carton(K=A)|
ON/OFF Daylight Sensor Detection Area Warranty 5 years Hold time
With a installation hole, it's more convenient for users.
With a protruding module, it will need to remove a very few light bead on the board to expose the module out of the metal board
Simple wiring way with four terminals:
"N,L" connecting with power supply and "N,L'" connecting with LED driver.
Max. detection range will be 12m for ceiling mounted; Max. Detection range will be 10m for wall mounted.
Typically installation height 8-12M. This figure indicates the maximum distance at the highest mounting height with 100% sensitivity.
DIP Switch Settings
1& 2 to set detection area.
|3 & 4 to set Hold time
The period of light keeping 100% brightness after moving objects leave the detection area.
|5 & 6 to set Daylight threshold
Definition of the ambient brightness; only when the ambient brightness is lower than the preset specific lux amount, the sensor will work; when it's preset as "disable",the sensor works everytime it detects motion regardless the ambient brightness.
1. Automatically ON/OFF function
Light on when detect movement and off after people leave at night. Applications: Corridor, Staircase.
2. No daylight function
The daylight threshold is set to "Disable".
Light on when detect movement, After people leave, Light off after hold on time. Applications: Dim places such as Basement Parking, Underpass.