|Place of Origin:||China|
|Certification:||UL TUV CE RED SAA|
|Minimum Order Quantity:||100PCS|
|Packaging Details:||Bubble pack, paper flat, outer carton.|
|Delivery Time:||1-3 days for sample order, 1-2 weeks for bulk order|
|Payment Terms:||T/T, L/C, Western Union|
|Supply Ability:||200,000pcs per month|
|Operating Voltage:||220~240 VAC 50/60Hz||Microwave Power:||<1mW|
|Design:||Rod Antenna Design||Approval:||TUV CE SAA RED|
|Detection Range:||Max. 12m/39.36ft||Switching Capacity:||Max.100W|
Rod Antenna Design Microwave Motion Sensor Max 100W Switching Capacity
HD411SR- ON/OFF Microwave Motion Sensor with IP20 and Rod Antenna Design for Built-in Installation, Max. 14M Range x 4M Height 120-277VAC Operating Voltage For Panel Light/Ceiling Light/Tri-proof Light.
Detailed Product Description
|Input||Operating Voltage||220-240V AC 50Hz/60Hz|
|Power of Load||Max.100W|
|Current of Load||N/A|
|Surge Current of Load|
|Type of wiring||N/A|
|Sensor Parameters||Operating Frequency||5.8 GHz ±75 MHz|
|Transmitting power||<1mW Max.|
|Mounting Height||Suggested 4M Max, ceiling mounting|
|Wireless Module||Operating Frequency||N/A|
|Number of coding||N/A|
|Certificate Standards||Safety standards||N/A|
|Environmental protection||Compliant to RoHS|
|Certificates||Compliant to CE TUV RED|
|Others||Wiring||4-pole pluggable clamp terminal (L,N,N,L’) for 24-14AWG cable|
|Package||Bubble pack, paper flat, outer carton.|
|Lifespan||50000h @ Ta Full load|
|Remark:1. “N/A”means not available 2. Each data is tested under certain condition|
4-pole press-in terminal (L, N,N,L′),easy assembly.
With Rod Antenna Module, easy to be installed inside of the lighting fitting;
With existed installation hole, easily fixed to the lighting board;
With IR Receiver, it could be set via our general ON/OFF remote controller;
With dalight detector, HD411SR has daylight function beyond motion detection function.
With thinner design, it could be fixed inside of ceiling light / panel light.
With Rod Antenna Module, there would be blinded detection area right below the center of light.
It's will be better for ceiling mounting instead of wall mounting.
Typical installation height 2.5-4m
This figure indicates the maximum distance at the highest mounting height with 100% sensitivity.
With thinner design and rod antenna module, it could be easily installed inside of many different structure of lighting fittings with opening a very small hole only.
1. Automatically ON/OFF function
Light on when detect movement and off after people leave at night. Applications: Corridor, Staircase.
With sufficient daylight, With insufficient daylight, After the last detection
even when motion when motion detected, and the present hold
detected, light remains light ON. time elapsed, light OFF.
2. No daylight function
The daylight threshold is set to "Disable".
Light on when detect movement, After people leave, Light off after hold on time.
Applications: Dim places such as Basement Parking, Underpass.
When motion is After people leave the After the last detection
detected, the sensor will detection area, light and the present hold
switch on the light to remains 100% brightness time elapsed, light OFF.
100% brighteness. within hold time.
1. Suitable for indoor installation to avoid false triggering due to external factors such as rain, wind or
2. Shall not be installed in the place with all four metal shelters and small space (such as
galvanized-iron roof ).
3. Shall note be mounted installation, so as to avoid false trigger caused by the lamp itself shaking.
4. Shall not be installed next to large operating machines such as ventilator/ceiling fan to avoid false
triggering caused by machine vibration.