|Place of Origin:||China|
|Certification:||CE / RoHs|
|Model Number:||HD016VCR 2|
|Minimum Order Quantity:||100PCS|
|Packaging Details:||Bubble pack, paper flat, outer carton.|
|Delivery Time:||1-3 days for sample order, 1-2 weeks for bulk order|
|Payment Terms:||L/C, T/T, Western Union|
|Supply Ability:||200,000pcs Per Month|
|Operating Voltage:||12VDC||Microwave Frequency:||5.8GHz±75MHz|
|Mounting Height:||Max.4m/13.12ft||Appearance Design:||Rod Antenna And DIP Switch Design|
|Detection Range:||Max.ø10m/32.8ft||Lifetime:||50000 Hours|
|Operating Temperature:||-20°C~+60°C||Microwave Power:||<0.3mW|
Compact 12V DC Motion Sensor 5.8GHz Microwave Sensor Rod Antenna 9 DIP Switch
HD016VCRH 2 is a super compact and slim design 12 volt DC microwave motion sensor with a rod antenna to be easily installed inside of LED light. 1-10V dimming motion detector with DIP switch to set all parameters and also support remote control settings.
1. 12VDC Operating Voltage with 1-10V Dimming function
2. Automatically turn on/up/down/off the LED light when detect movement or no movement.
3. With rod antenna module, easily installed inside of tri-proof and linear light with a very small holl
4. 5 years warranty
5. With 9 DIP switch keys, it provides more options for the Hold time, Detection area, Stand-by period, Stand-by dimming level and Daylight threshold.
6. Turn off the light or dim the light to a lower brightness like 10%, 20% and the like when no movement to save energy and play a role of sustainability.
8. Certificate of CE/RoHs
|Safety & EMC||Approval||CE, ROHS|
|Sensor Parameters||Operating temperature||-20°C~+60°C|
|Daylight threshold||2Lux/10Lux/50Lux/ Disable|
|Stand-by dimming level||10%/20%/30%/50%|
|Wireless Parameters||Microwave Frequency||5.8 GHz ±75 MHz|
|Others||Packaging Requirement||Bubble pack, paper flat, outer carton.|
|Installation||Installed inside lamps|
|IP rating||IP 20|
ON/OFF Daylight sensor Detection area Hold time Warranty 5 years
stand-by period stand-by dimming
Rod antenna makes reliable detecting, avoid false trigger when sensor built-in backside of metal LED plate.
Three control line to be connect with LED driver:
RED is for connecting with +12V
BLACK is for connecting with GND
YELLOW is for connecting with OUT
Max. detection range will be 12m/39.36ft for ceiling mounted with Max. Mounting height of 2.5-4M/8.2-13.12ft.
Dip switching settings:
Detection Area (Sensitivity)
In this area,movement will be detected and able to trigger the sensor.
100% detection area is also known as the strong sensitivity.
The period of light
keeping 100% brightness after moving objects
leave the detection area.
*Disable means the daylight sensor does not work.
The sensor will turn on light once motion is detected regardless of ambient light level.
Definition of the ambient brightness; only when the ambient brightness is lower than the preset specific lux amount, the sensor will work; when it's preset as"disable",the sensor works everytime it detects motion regardless the ambient brightness.
The period of light keeping low output before it's completely switched off. When it's preset as"∞“, the light always keep at low output if no movement in the detection area and doesn't turn off.
Stand-by dimming level
The definition of low output in the standby period.
It could penetrate most materials like glass, plastic and the like but metal which make it be very widely used for ceiling light/tri-proof light and panel light in different occasions like parking lot, production, industrial field and so on.