-
Microwave Motion Sensor
-
BLE Motion Sensor
-
PIR Motion Sensor
-
Dimmable Motion Sensor
-
Motion Sensor ON OFF Switch
-
UL Version Emergency LED Driver
-
UL Sensor
-
DC Motion Sensor
-
DALI Motion Sensor
-
IC Sensor
-
Photocell Daylight Sensor
-
Motion Sensor Driver
-
Universal Smart Remote Control
-
CE Version Emergency LED Driver
-
UFO Driver
-
ClemensYour products are used in industrial refurbishment projects here in Europe and enjyo excellent reputation. -
TamasWe are using some of your products and they are excellent! -
AngeloYour HT18V-I works perfectly for my project.
Isolated Solution 36W Motion Sensor Driver DIP Switch Setting
| Control: | DIP Switch Control |
|---|---|
| Product Name: | Microwave Motion Sensor |
| Hold Time: | 5s/30s/1min/5min |
| Mounting Height: | Max.6m/19.68ft |
| Detection Range: | Max.ø14m/45.92ft |
Thermoplastic IP20 Motion Sensor Driver Dimmable Remote Control
| Stand-by Dimming Level: | 10%/20%/30%/50% |
|---|---|
| Function: | LED Dimmable Driver Sensor |
| Mounting Height: | Max.6m/19.68ft |
| Power Factor: | ≥0.9 |
| Safety Standard: | EN61347-1 EN61347-2-13 EN60598-1 |
220V 240VAC Motion Sensor Driver Isolated Solution For Ceiling Light
| Driver: | 28W Isolated Driver Solution |
|---|---|
| Certificate: | TUV CE RED |
| Function: | Dimmable Driver And Sensor |
| Warranty: | Normally 3 Years, Could Be 5 Years |
| Output LED Voltage: | 24-42V/24-42V/24-42V/24-40V |
TUV CE RED SAA Lighting Occupancy Sensor 2 In 1 Interior Motion Sensor
| LED Driver: | 18W Isolated LED Driver |
|---|---|
| Certificate: | TUV CE RED SAA |
| Input Voltage: | 220~240VAC 50/60Hz |
| Output LED Voltage: | 24-42V/24-42V/24-42V/24-40V |
| Output LED Power: | 8-15W/10-16W/12.5-18W/14-18W |
120-277V AC Microwave Dimmable Sensor With Isolated Driver Solution
| Function: | Dimmable Driver And Sensor |
|---|---|
| Control: | By DIP Switches |
| Design: | Detached Design |
| Input Voltage: | 120~277VAC 50/60Hz |
| Warranty: | 3 Years, |
Isolated Solution Dimmable Occupancy Sensor Remote Control Setting Datached Design
| Function: | LED Dimmable Driver Sensor |
|---|---|
| Stand-by Period: | 0s/10s/30s/1min/5min/10min/30min/+∞ |
| Stand-by Dimming Level: | 10%/20%/30%/50% |
| SCP:Auto Recovery,OVP,OCP,OTP: | 87% (Max.) |
| Control: | Remote Control |
Isolated LED Emergency Motion Sensor Driver Max 0.4A Input Current
| LED Driver: | Max. 40W |
|---|---|
| Certificate: | CE |
| Input Voltage: | 120~277VAC 50/60Hz |
| Input Power: | 45W(Max.) |
| Input Current: | 0.4A Max. |
Microwave 28W Dimmable Motion Sensor Switch Planar Antenna Driver
| Input Votage: | 220-240VAC 50/60Hz |
|---|---|
| Size: | 114mm*47.2mm*29mm |
| Power Factor: | Greater Tha 0.9 |
| Efficiency: | 85%(Max) |
| Output LED Current: | 0.45A/0.55A/0.60A/0.70A |
Wire Length 300mm 12V DC Motion Sensor For LED Tube Triproof Light
| Parameters Setting: | By Remote Control |
|---|---|
| Motion Detected: | 0.5~1m/s |
| Power Supply: | 10.5-15VDC(Supply Current > 50mA) |
| Warranty: | 5 Years |
| Wire Color: | Cable Length 300mm , Black 12V,Purple DIM+, Yellow DIM |
Built-in 100W Load Economic ON/OFF Microwave Sensor 220-240VAC
| Product Name: | ON/OFF Sensor |
|---|---|
| Frequency: | 5.8GHz±75MHz |
| Switching Capacity: | Max.100W |
| Stand-by Power: | ≤0.5W |
| Microwave Power: | <0.3mW |

