All Products
-
Microwave Motion Sensor
-
BLE Motion Sensor
-
PIR Motion Sensor
-
Dimmable Motion Sensor
-
Motion Sensor ON OFF Switch
-
UL Version Emergency LED Driver
-
UL Sensor
-
DC Motion Sensor
-
DALI Motion Sensor
-
IC Sensor
-
Photocell Daylight Sensor
-
Motion Sensor Driver
-
Universal Smart Remote Control
-
CE Version Emergency LED Driver
-
UFO Driver
-
ClemensYour products are used in industrial refurbishment projects here in Europe and enjyo excellent reputation. -
TamasWe are using some of your products and they are excellent!
-
AngeloYour HT18V-I works perfectly for my project.
Contact Person :
Evelyn Chow
Phone Number :
13410390591
Whatsapp :
+8613410390591
Keywords [ 5 8ghz microwave motion sensor module ] match 43 Products.
Wire Length 300mm 12V DC Motion Sensor For LED Tube Triproof Light
| Parameters Setting: | By Remote Control |
|---|---|
| Motion Detected: | 0.5~1m/s |
| Power Supply: | 10.5-15VDC(Supply Current > 50mA) |
| Warranty: | 5 Years |
| Wire Color: | Cable Length 300mm , Black 12V，Purple DIM+, Yellow DIM |
0-10V Microwave Sensor φ39.1*8mm(H) Module for UFO Max. 10m High
| Operating Voltage: | 10-15VDC |
|---|---|
| Operating Current: | <30mA |
| Output: | Dim 0-10V |
| Detection Range: | Max,ø14m/45.92ft (ceiling Mounted) |
| Mounting Height: | Max.10m/32.81ft (ceiling Mounted) |
Daylight Harvesting Function Bare Board High Altitude Install DC Motion Sensor
| Function: | Daylight Harvesting |
|---|---|
| Connector: | Wireless Pins |
| Mounting Height: | 15m High Installation For Highbaylight |
| Setting Parameters Method: | Remote Control |
| Microwave Power: | Lower Than 0.3mW |
Dial Code On The Back 12VDC Motion Sensor Automatic Control Liner Design Easy To Install
| Wire: | RED(12VDC Input) / BLACK(GND) / YELLOW(0-10V OUTPUT) |
|---|---|
| Parameter Set: | Dip Switch Or Remote Control |
| Size: | L*W*H:85*22.3*24.5MM |
| Output: | 0-10v Dimming |
| Stand-by Period: | 0s/30s/20min/+∞ |
Daylight Priority Bare Board DC Motion Sensor 10m Installation Height
| Operating Voltage: | 10-15VDC |
|---|---|
| Stand-by Power: | <30mA |
| Output: | Dim 1-10V/5V PWM |
| Microwave Power: | <0.3mW |
| Connect Method: | Bonding Pad,+12v,GND,DIM+ |
15m High Altitude Install 12VDC Input Remote Control Motion Sensor
| Size: | 51*24.4*14mm |
|---|---|
| Mounting Height: | 15m High Installation |
| Function Setting: | By Remote Control |
| Input: | 12VDC |
| Output: | 0-10v |
Wire Crystal Head DC Motion Sensor Compact Size Remote Control Setting
| Output: | 5V PWM/5V TTL |
|---|---|
| Connector: | 4pin Crystel Head |
| Size: | 51*24.4*14mm |
| Wire Length: | Excluding Terminal Length 525mm |
| Motion Detection: | 0.5~1.5m/s |
220 - 240VAC On Off Switch Sensor Without Housing For Built In Installation
| Operating Voltage: | 220-240VAC 50/60Hz |
|---|---|
| Switching Capacity: | 220V, 100W |
| Microwave Frequency: | 5.8GHz±75MHz |
| Detection Angle: | 30-150°(Without The Glass) |
| Detection Range: | Max.8-10x6m(øxH) |
White Color On Off Switch Sensor 30° - 150° Wide Detection Angle With Simple Structure
| Operating Voltage: | 120-240 VAC 50/60Hz;120-277 VAC 50/60Hz |
|---|---|
| Mounting Height: | Max.6m/19.68ft |
| Function: | On/off |
| Interfaces: | 4-pole Pluggable Clamp Terminal(L,N,N,L’) For 1.5mm2 Cable |
| Detection Angle: | 30°-150° |
4 DIP On Off Switch Sensor 4 Pole Pluggable Clamp Terminal Easy Installation
| Input Voltage: | 220~240VAC 50/60Hz |
|---|---|
| Certificate: | CE SAA RoHS RED TUV |
| Switching Capacity: | Max.100W |
| Hold Time: | 5s/1min/3min/10min |
| Size: | 76.9*39.9*27.7mm |