Send Message

Dial Code On The Back 12VDC Motion Sensor Automatic Control Liner Design Easy To Install

Product Details:
Place of Origin: China
Brand Name: HAISEN
Certification: CE RoHS
Model Number: HD016VCR 2
Payment & Shipping Terms:
Minimum Order Quantity: 100PCS
Price: Negotiable
Packaging Details: bubble pack, paper flat, drying agent,outer carton.
Delivery Time: 1-3 days for sample order, 1-2 weeks for bulk order
Payment Terms: L/C, T/T, Western Union
Supply Ability: 200,000pcs per month
Specifications Product Description Request A Quote
Wire: RED(12VDC Input) / BLACK(GND) / YELLOW(0-10V OUTPUT)
Parameter Set: Dip Switch Or Remote Control
Size: L*W*H:85*22.3*24.5MM
Output: 0-10v Dimming
Stand-by Period: 0s/30s/20min/+∞
Hold Time: 5s/30s/1min/10min
Connector: Lead The Output
Wire Length: 525mm(without The Crystal Joint)
High Light:

525mm wire 12v outdoor motion sensor


Dip switch 12 volt motion sensor


dimming movement detection sensor

Product Description

Dial Code On The Back 12VDC Automatic Control Liner Design Easy To Install


Dial code setting of motion sensor:

1.Support 9-bit dialing code combibation to set parameters to achieve the desired scenario.

2.code 1,set the detection area;

   code 2&3,set the hold time;

   code 4&5,set the daylight threshold;

   code 6&7,set the stand-by period;

   code 8&9,set the stand-by dimming level.


Detection area
In this area, movement will be detected and able to trigger the sensor. 100% detection area is also known as the strong sensitvity.
The period of light keeping 100% brightness after moving objects leave the
detection area.
Daylight threshold
Definition of the ambient brightness; only when the ambient brightness is lower than the preset specific lux amount, the sensor will work; when it's preset as "disable", the sensor works everytime it detects motion regardless the ambient
Stand-by period
The period of light keeping low output before it's completely switched off. When it's preset as"∞“, the light always keep at low output if no movement in the detection area and doesn't turn off.
dimming level
The definition of low output in the standby period.



Wiring diagram of DC sensor:
Wire color +12V(Red),GND(Black),OUT(Yellow)
Control method ON/OFF/ DIM /1-10V / remote control
Microwave frequency 5.8GHz±75MHz
Microwave power <0.3mW
Operating voltage 12VDC±5%
Power <0.5w
1.The wire color would be Red +12VDC,Black GND,Yellow OUT

2.The output is 0-10V dimming

Detection area of DC sensor:
This figure indicates the maximum distance at the highest mounting height with 100% sensitivity.
Typical installation height 2.5-4m
Mounting height ≤4M/13.12FT(ceiling mounted)
Detection range Max,ø14m/45.92ft (ceiling mounted)
Detection angle 30°-150° (without glass)
Motion detection 0.5~1.5m/s



Dimmensions of DC Sensor:

Size L*W*H:85*22.3*24.5MM
Wire length 525mm(without the crystal joint)
Operating temperature -20°C~+60°C
Warranty 5 years
Function setting By remote control and dial code
IP grade IP 20

1.White four-core wire,excluding terminal length 525mm.



Mechanical structure of DC sensor:

Connect method Wire line 525mm,+12V(Red),GND(Black),OUT(Yellow)
Connector Lead the output
Stand-by period 0s/30s/20min/+∞
Stand-by dimming level 10%/20%/30%/50%
Detection area 100%/50%
Hold time 5s/30s/1min/10min
Daylight threshold Disable/50Lux/10Lux/2Lux

1.Connector:4 PIN wire crystal head
2.Installation hole:Two mounting holes for easy fixation in the lamps
3.Daylight sensor:Strain the light intensity, convert the light signal into electrical signal, control the switch of the lamp
4.Antenna module:Detect motion signals of objects.



1. Automatically ON/OFF function:
With sufficient daylight,even when motion detected,light remains OFF.
With insufficient daylight,when motion detected, light ON.
After the last detection and the present hold time elapsed, light OFF.
2. No daylight function
When the daylight threshold is set to "Disable".
Light on when detect movement, After people leave, Light off after stand-by period.
Applications: Dim places such as Basement Parking, Underpass.
  When motion is detected, the sensor will switch on the light to 100% brighteness.
  After people leave the detection area, light remains 100% brightness within hold time.
  After the last detection and the present hold time elapsed, light OFF.


3. Function Demo - Dimmable control/Corridor function
With sufficient daylight,even when motion detected,light remains OFF.
With insufficient daylight,when motion detected, light ON.
After last detection, the light will be dimmed down to the stand-by
dimming level (10%,20%,30% or 50%) after holdtime.
After the stand-by period, light OFF.



Installation Method of DC Sensor:

Installation precautions of motion sensor 1. Microwave sensor can be installed in any lamp except the one with full metal shell.
2. The detected surface cannot be shielded by metal objects.
3. Make sure the microwave module is completely exposed outside.
4. The detection surface of the sensor module shall be installed facing the detection area.
5. Should be kept away from the driver to avoid interference generation and lamp flashing.
6. Wiring must be strictly in accordance with the wiring diagram to avoid short circuit.




Features of ON/OFF Sensor:

1. Rod Antenna Module to avoid any shadow

2. DIP switch rightabout the rod antenna, to make it easier to set all parameters needed

3. Super slim design to be suitable for linear light, tri-proof light, panel light, ceiling light

4. 0-10V output to support dimming function and save energy

5. More options of dimming level to provide better experience for end users

6. With plug in the end of the wire to make it easier to be connested with the LED driver

7. RED(12VDC input) / BLACK(GND) / YELLOW(0-10V OUTPUT)


HD016VCR 1, 2.pdf



Get in touch with us
Contact Person : Miss. Evelyn Chow
Tel : 13410390591
Characters Remaining(20/3000)