ClemensYour products are used in industrial refurbishment projects here in Europe and enjyo excellent reputation.
TamasWe are using some of your products and they are excellent!
AngeloYour HT18V-I works perfectly for my project.
Remote Control Plane Antenna Indoor Light Motion Sensor
|Place of Origin||China|
|Minimum Order Quantity||100PCS|
|Packaging Details||Bubble pack, paper flat, outer carton.|
|Delivery Time||1-3 days for sample order, 2-3 weeks for bulk order|
|Payment Terms||L/C, T/T, Western Union|
|Supply Ability||100,000pcs Per Month|
|Operating Voltage||220~240 VAC 50/60Hz||Function||Dusk/Dawn Sensor And Dimmable|
|Output||Constant Current Output||Certificate||CE RoHS|
|Setting Parameters||By Remote Control||Warranty||3 Years|
|Microwave Frequency||5.8GHz±75MHz||Application||For Ceiling Light And Bulikhead|
Plane Antenna Indoor Motion Sensor,
Plane Motion Sensor Dimmer Switch
Plane Antenna Remote Control Build-in Dial Code RoHS CE Certification
1.Constant current output.
2.On/off control by relay.
3.Tri-level control by 1-10V output.
4.Suitable for ceiling lights and Bulkhead.
5.Sensitive and reliable.
6.All parameters could be set by remote control.
7.IP 20 and 3 years warranty.
On/Off Control Detection Area Hold Time Daylight Sensor
Stand-by dimming Stand-by Output Current Remote Control
The fixture indicates teh maximun distance at the highest mounting height with 100% sensitivity.
Typical installation height 2.5-6M.
Our special active photocell technology can tell the difference between natural light and LED light, to
ensure the light will be off when needed.
With Daylight priority function, HT30V is able to differentiate artificial light brightness from
Light automatically With insufficient Lights dims to standby Light off when
on when ambient ambient brightness level if no motion ambient lux level is
brightness is lower light dims to 100% detected after higher than preset
than preset lux level. when motion holdtime. Lux mount.
1.Automatically ON/OFF function:
Light on when detect movement and off after people leave at night.Applications:Corridor,Staircase.The daylight threshold is set to"2Lux,10Lux,50Lux".
With sufficient daylight,even With insufficient daylight, After the last detection and the
when motion detected,light when motion detected, present hold time elapsed,
remains OFF. light ON. light OFF.
2.No daylight function:
The daylight threshold is set to"Disable".Light on when detect movement,after people leave,light off after stand-by period,Applications:Dim places such as basement parking ,underpass.
When motion is detected, After people leave the After the last detection and
the sensor will switch on the detection area,light remains the present hold time
light to 100% brightness. 100% brightness within elapsed,light OFF.
3.Function demo-dimable control/corridor function
With sufficient daylight,even With insufficient daylight, After the last detection the light
when motion detected,light when motion detected, will be dimmed down to the
remains OFF. light ON. stand-by dimming level
(10% or 30%)after hold time
After the stand-by period,
1.Microwave can penetrate walls or glass thinner than 20cm and attenuate if thicker than 20cm.
2.The driver voltage shall be stable and float within 10%.
3.Detection area will be affected by speed of motion, mounting height and movement volume.
4.Conduct test on sunny days without the lampshade which will affect the tested lux value.
Remote Control Application:
1.Press "ON/OFF button "to turn on the light or off.
2.To reset the parameters,Please follow the steps as below:
Step 1-press ON,to turn on the light if it was off at the start.
Step 2-press "Start" to the well-setting sensor
Step 3-press the button of detection rang,hold time,stand-by dimming level,stand-by period and daylight threshold one after the other in sequence(press"+/-"to set parameters).
Step 4-press "Memory" to memorize the settings.
(Note:The interval of each parameter setting shall be controlled within 30s)
3.To programme other lights in the array that have similar sensors to the same programme.
Step 1-press"ON" to the second sensor
Remark:Factory default setting:detection area 100%/hold time 5s/daylight threshold disable/satnd-by period 0s/stand-by dimming level 10%.