Output Power 12W Dimmable LED Driver Sensor Low Voltage 0.3A 0.35A

Output Power 12W Dimmable LED Driver Sensor Low Voltage 0.3A 0.35A

Constant Current 0.3A/0.35A LED Driver & Microwave Sensor 2-in-1 Max.12W Ceiling Light

HT19V is a Dark & Dawn 18-36V Output Voltage LED Driver&Microwave Sensor 2-in-1  with Detection Range & Height of 6m(H) x 14m(D), 6-12W Output Power Dimming Function Microwave Motion Detector Suitable for Ceiling Light

Features:

1. Dusk & Dawn Microwave Motion Sensor

2. Dimming Function with 10%/20%/30%/50% Stand-by Brightness

3. Constant Current with options of 0.3A/0.35A

4. Detection Range x Height of 14M x 6M

5. Output Power 12W max. with Voltage of 18-36V

6. Efficiency of 87%

7. Tri-level control by 1-10V output

8. Empty Load voltage of 63V max.

9. Abnormal protection SCP: Auto recovery, OVP, OCP, OTP

10. EMC standardEN55015

11. IP20, 3 years warranty

Product Description

Detection Range

This figure indicates the maximum distance at the highest mounting height with 100% sensitivity.

Typical installation height 2.5-6m.

Mechanical structure

With eight DIP switch poles to set all parameters

With two DIP switch poles to choose different output current

With two installation hole, easily fixed to the lighting fixture for end user.

Wiring diagram

Two poles to connect with power supply (220-240VAC)

Two poles to connect with LED Light

Dimensions (mm)

DIP Switch Setting

Detection area  Hold-time     Daylight threshold   Stand-by period  Stand-by dimming level

In this area,          The period of      Definition of the           The period of light       The definition of
movement will      light keeping       ambient brightness;     keeping low output      low output in the
be detected         100% brightness   only when the              before it's                     standby period.
and able to           after moving        ambient brightness      completely
trigger the            objects leave the  is lower than the         switched off. When
sensor. 100%        detection area.     preset specific lux       it's preset as"∞“,
detection area                                  amount, the sensor      the light always
is also known                                   will work; when it's       keep at low output
as the strong                                    preset as "disable",       if no movement in
sensitvity.                                         the sensor works          the detection area

                                                         everytime it detects      and doesn't turn off.
                                                         motion regardless
                                                         the ambient brightness.                                                    

Output Current Setting

Set the current to be 350mA by plugging black cap on 1&2 PIN, and 300mA by plugging on 2&3 PIN.

Daylight Priority

With Daylight priority function, HT19V-I is able to differentiate artificial light brightness
from natural light after installed inside the fixture, and automatically turn off light when
ambient brightness exceeds preset lux level.

Precondition of Daylight priority:
1. Standby period is +∞;
2. Standby dimming level is on 10% or 30%;
3. Daylight threshold is on 2Lux, 10Lux or 50Lux.

Application Demo

1. Automatically ON/OFF function:

Light on when detect movement and off after people leave at night. Applications: Corridor, Staircase.
The daylight threshold is set to "2lux,10lux,50lux"

With sufficient daylight,                 With insufficient daylight,             After the last detection and
even when motion detected,          when motion detected, light ON.   the present hold time
light remains OFF.                                                                               elapsed, light OFF.

2. No daylight function
The daylight threshold is set to "Disable".
Light on when detect movement, After people leave, Light off after stand-by period.
Applications: Dim places such as Basement Parking, Underpass.

When motion is detected,              After people leave the detection    After the last detection and
the sensor will switch on the         area, light remains 100%                the present hold time
light to 100% brighteness.             brightness within hold time.          elapsed, light OFF.

3. Function Demo - Dimmable control/Corridor function

With sufficient daylight,   With insufficient           After last detection,        After the stand-by
even when motion           daylight, when motion  light will be dimmed       period, light OFF.
detected, light remains    detected, light ON.       down to the stand-by
OFF.                                                                     dimming level (10% or

                                                                            30%) after holdt

User Notes:

1. The detected surface cannot be shielded by metal objects.
2. Make sure the microwave module is completely exposed outside.
3. The detection surface of the sensor module shall be installed facing the detection area.
4. Wiring must be strictly in accordance with the wiring diagram to avoid short circuit.